РУ/EN
Amplifier Communications (ProCom)

Amplifier V250 V2x250, V500

Amplifier V250 V2x250, V500

Amplifier module. Type V250 and V500

    V250D V2x250D V500D
  Measurement
Conditions
  mono mono
Power (RMS)(230V~) 40 Ohm/100V 1×250W 2×250W 1×500W
20 Ohm/100V
Power Supply DC 48В DC 1×240W 2×240W 1×480W
THD+N 1 kHz 200W 0,29%
Frequency -3dB 90 Hz — 19 kHz
Input sensitifity 70 Hz—20 kHz 1V
Input impedance 1 kHz 10 кOhm
External voltage distance 1 kHz; 250W; Vol 0.5 85 dB
Noise voltage distance   91 dB
Inputs electr. symmetrically &ndsp; 2 switchable inputs per chanel
Inrush current 230v AC 6A with NTC recovery time 60 sec.
Inrush current with R 10 Ohms/td> 230V AC 5A (500 mS) with R recovery time 1 sec.
Current consumptuion Standby 48V   0,058A 0,058A
Standby 0,034A 0,048A 0,048A
2Ch active,
0W output,
48V DC
  0,25A 0,25A
2Ch active,
0W output,
230V AC
0,09A 0,15A 0,15A
48В DC Sinus signal   13,5A 13,5A
230V AC Sinus signal
100V 40 Ohm
1,7A 380W 4A 4A
Connections  
Input jack Connectable screwing terminal 8 pin      
Output connector Connectable screwing terminal 2 pin      
DC in/td> Connectable screwing terminal 2 pin      
Mains 230V Rubber connector      
 
Weight   11.5 kg 12.5 kg 12.5 kg
Dimensions 19“ 2HE (482x88x256 mm)